How do I choose the right PVC irrigation fitting?
Start with the pipe size, the pressure rating and the joint type on the line you are working on. Most irrigation jobs need fittings that match the outside diameter of the pipe exactly, so a 50 mm pipe needs 50 mm fittings, not a close fit. If you are not sure, send us the pipe size, the line pressure and a photo of the damaged section through the enquiry form and our team will help you match it up.
For farm reticulation, nursery lines and landscape work, it helps to confirm whether you need a straight coupling, elbow, tee, reducer or end cap. If the system sees pressure spikes during start up, it is wise to check that the fitting and pipe class are suited to the same working conditions. In hot Limpopo conditions and around coastal humidity elsewhere, material choice and proper jointing matter alot for long term use.
- Measure the pipe outside diameter before ordering
- Check whether the line is low pressure or pumped
- Confirm if you need solvent-weld, threaded or transition parts
- Keep a spare fitting or two for repairs
What should I know about solvent-weld joints?
Solvent-weld fittings are joined by cleaning, priming if required, applying the correct solvent cement and pushing the pipe fully home in one smooth action. The joint then bonds as the pipe and fitting set together. For the best result, dry-fit the pieces first and mark the insertion depth so you do not lose line length during assembly.
Do not rush the curing time, especially on larger diameters or in cooler weather. If a line is pressurised too early, the joint can fail later and cause avoidable downtime. Thabo Mashaba in our technical support team often advises contractors to plan the jointing sequence before opening the cement tin, because once the work starts you want everything close at hand and ready.
- Cut pipe square and remove burrs
- Clean away dust, mud and moisture
- Apply cement evenly and assemble quickly
- Hold the joint steady for the recommended set time
Which tools make irrigation installation easier?
The right tools save time on site and reduce mistakes. For irrigation work, contractors often ask for tools that support cutting, measuring, marking, deburring and joint preparation. If you are working on a boundary line, a pump room or a long farm run, keep the tools together in one kit so the job does not stall halfway through.
We stock practical tools for selection and installation support, not general-purpose items that wear out fast under outdoor use. Lerato Mokoena and Annelie van Zyl often help clients decide what to keep for repeat jobs, especially where the same pipe sizes come up on multiple farms or landscaping sites. A small toolkit can make a big difference when you are working after rain, in dust, or during load-shedding windows.
- Pipe cutter or fine-tooth saw
- Measuring tape and marker
- Deburring or cleaning tool
- Spare gloves and wiping cloths
How do deliveries work from Polokwane and across Limpopo?
Our base is in Ladanna, Polokwane, and we support customers across Limpopo with regional stock movement and courier dispatch nationwide. If you are in Mokopane, Tzaneen, Hoedspruit, Lephalale or Thohoyandou, we can arrange supply depending on the order and the timing. For larger farm orders, Johan Smit in logistics helps plan stock movement so the correct items leave together.
Where possible, reserve stock early if you are scheduling irrigation work around planting, contractor deadlines or municipal restrictions. That way you avoid waiting for a second trip because one fitting was missed. For urgent repairs, we can also assist with quantity checks before dispatch so you do not receive a box that is short on a critical size.
- Ladanna base stock for local collection planning
- Polokwane supply area for nearby orders
- Regional runs for selected Limpopo towns
- Courier option for orders going further afield
Can you help if I am not sure what to order?
Yes. Many customers know the problem on site but are not sure which fitting or tool will solve it. If you send details through the enquiry form, we can help with product selection, system matching and troubleshooting support. It helps if you include the pipe size, the pump type, the number of lines and whether the issue is a repair, a new run or a repeat order.
Mpho Sekgobela oversees the business, with Nokuthula Dlamini and the support team handling enquiries so answers are practical and quick. If you are a contractor, we can also discuss contractor accounts and repeat order support for jobs that use the same fittings month after month. The more detail you give us, the faster we can narrow it down.
- Describe the irrigation problem clearly
- Share pipe sizes and quantities needed
- Note whether the site is farm, landscape or domestic
- Ask for jointing advice if you are unsure on installation
What makes a fitting suitable for outdoor irrigation use?
Outdoor irrigation fittings must handle sun, dust, soil movement and constant water exposure. On some sites, the bigger challenge is not pressure but long hours of UV and physical handling during maintenance. A fitting that is fine indoors may not last when it is exposed on a field edge or near a pump station. That is why we focus on durable stock suited to outdoor conditions.
For best results, keep fittings stored out of direct sun until you are ready to fit them, and avoid leaving open boxes in wet grass or muddy yards. In coastal humidity or very hot inland conditions, correct storage and proper jointing both matter. If you are planning a large farm order, ask for advice on the quantity and the matching parts so you do not end up with a pile of mismatched pieces.
- Check UV exposure on exposed lines
- Store stock dry and out of direct sun
- Match fittings to the pipe class and pressure
- Plan spares for repairs and future maintenance
What happens after I place a repeat order?
Repeat orders are handled with the same care as the first one, but they move faster when the previous sizes and quantities are already known. If you have ordered before, we can use that history to help confirm what you need for the next run. This is useful for contractors and farms that use the same parts across multiple fields or phases.
Our after sales support covers stock follow-up, quantity checks and help with replacements where a problem needs attention. If a line is failing repeatedly, we can help you review whether the issue is with the jointing, the pressure, or the parts chosen for the job. That kind of practical support saves time and keeps the irrigation system working when it matters.
- Use the enquiry form to request a repeat order
- Confirm quantities before collection or dispatch
- Keep notes on the sizes used on each site
- Ask for troubleshooting help if a problem returns
